Choose the package that fits your home. The more units you service, the more you save.
Our membership is designed to provide comprehensive care for your air conditioning systems while saving you money on essential maintenance.
Valid for 1 year, 1 time per contract
For comprehensive Chemical Wash
For General Servicing throughout the year
Exclusive member discount on all labour
Professional diagnosis at a reduced rate
Deep-reach foam cleaning that lifts hidden dust and bio-slime for fresher air and smoother airflow.
A high-performance decontamination using specialized chemicals to dissolve stubborn grime and restore cooling power.
A complete system teardown and deep chemical soak to eliminate leaks, odors, and "like-new" efficiency.
Gas Top-Up to keep your aircon blowing ice-cold with a precise refrigerant pressure top-up tailored to your system's needs.
Expert diagnostics pinpoint the root cause of failures, followed by reliable technical fixes and high-quality part replacements to get your system back to work.
Keep your aircon running efficiently and breathing fresh with our signature General Servicing. We utilize an advanced Foam Jet Cleaning technique that penetrates deep into the cooling coils, lifting stubborn dust and bio-slime that standard brushing simply can’t reach.
Our General Servicing is a routine maintenance package designed to prevent common breakdowns and maintain air purity. By using specialized foam rather than just water, we can remove up to 90% more hidden dust and bio-slime from your evaporator coils, ensuring better airflow and lower electricity bills.
Checking the unit's cooling performance and noise levels.
Deep cleaning of the front panel and air filters.
Applying specialized cleaning foam to the evaporator coils.
Flushing out the foam and loosened debris.
Clearing the drainage tray and pipe to prevent leaks.
Drying the unit and verifying optimal airflow.
For residential units in Singapore, we recommend every 3–4 months.
No, it leaves a mild, fresh scent and is completely non-toxic.
When standard servicing isn’t enough to tackle heavy buildup, our Chemical Wash provides a thorough decontamination of both your indoor and outdoor units using professional-grade solutions.
This service is designed for units that haven’t been serviced in over 6 months or are losing cooling power. We use an alkaline-based chemical solution to dissolve hardened grease, mold, and bacteria that high-pressure water alone cannot remove, restoring the heat exchange efficiency of your system.
Our technicians test the cooling efficiency to determine the level of chemical treatment needed.
Technicians will lay protection cover on floor to prevent chemical damage
Specialized chemicals are sprayed onto the coils to dissolve hardened grease and mold.
We will remove cylindrical blower for chemical washing. The aluminium evaporator coil stays on the wall-mount.
All components are thoroughly rinsed with water to ensure no chemical residue remains.
The system is put back together and monitored to ensure peak cooling is restored.
Yes, we use industry-standard chemicals diluted to be safe for copper and aluminum.
Yes, this service covers both the indoor fan coil and the outdoor condenser.
Restore your aircon to “like-new” condition. A Chemical Overhaul involves a complete strip-down of the unit to fix water leaking issues and eliminate foul odors caused by deep-seated mold.
A Chemical Overhaul is the most comprehensive cleaning available. We physically remove the entire unit from the wall to reach areas that are impossible to clean while mounted. This is the only guaranteed way to fix persistent “jelly” blockages in drainage trays and eliminate “sour” aircon smells.
The entire fan coil unit is professionally removed from the wall for a total teardown.
Individual components are soaked in a chemical bath to remove 100% of mold and bacteria.
We use a high-power vacuum to clear stubborn blockages within the drainage line.
Specialized grease is applied to the fan motor bearings for quiet operation.
The unit is re-mounted and all copper joints and electrical connections are secured.
A check is performed to ensure the system is running at factory-standard efficiency.
If your aircon is leaking water or has a persistent, unpleasant smell.
It takes approximately 60–90 minutes per unit due to the full dismantling.
Is your aircon running but not cooling? It might be low on refrigerant. We provide precise gas top-ups for all major brands, ensuring your compressor operates within the correct pressure range.
Refrigerant gas is what enables your aircon to absorb heat. If your gas levels are low, your compressor has to work twice as hard, leading to higher electricity bills and potential hardware failure. We ensure your system is filled to exact manufacturer specifications for optimal performance.
We use a manifold gauge to check the current PSI levels of the refrigerant.
Our technicians inspect accessible joints and valves for signs of oil stains or gas leaks.
We carefully refill the specific gas type (R32, R410A, or R22) to the required level.
The compressor’s electrical current is checked to ensure it isn't overworking.
Members enjoy one time free top up per contract year
Most modern units use R32 or R410A; our vehicles carry all types.
In a healthy system, gas shouldn't disappear; low gas often indicates a tiny leak.
Stop the guesswork. If your aircon is showing error codes, making strange noises, or simply won’t turn on, our expert technicians will perform a comprehensive diagnostic.
Our troubleshooting service is a diagnostic “health check” for your aircon. We don’t just find the symptom; we find the root cause. Whether it’s a faulty sensor, a dying capacitor, or a communication error between units, we provide a detailed report and an honest repair quote.
We listen for unusual mechanical noises and check for obvious physical damage.
Our team accesses the system's PCB to read digital error codes or light patterns.
We use a multimeter to test the health of capacitors, sensors, and the fan motor.
You receive a clear explanation of the fault along with a quote for the repair.
Yes, if you choose to proceed with the repair, we waive the diagnostic fee.
Many common issues, such as faulty capacitors, can be fixed during the same visit.
Prolong the life of your units and breathe cleaner air with AC HUB’s professional maintenance plans.
Transparent pricing with no hidden fees or hard selling of additional parts or services
We offer fair, competitive prices for high quaility service and parts
Our experienced team ensures reiliable, professional service every time
We provide a warranty on all our services for your peace of mind
Tell us about your air-conditioning requirements by submitting an enquiry through our website or contacting us directly. Share any details you have, and our friendly team will review your request and get back to you as soon as possible.
Once we understand your needs, we’ll help you arrange a service appointment at a date and time that’s most convenient for you. We aim to provide flexible scheduling to minimize disruption to your home or business.
Our skilled technicians will arrive on time and carry out the service with professionalism and care. From inspection to cleaning or repair, we ensure your air-conditioning system is handled safely, efficiently, and to the highest standards.
Choosing the right aircon is now simpler than ever. From massive government funding to our all-inclusive installation bundles, we make upgrading easy and affordable.
Your professional air-con service provider. Servicing, installation/Project and repair
Copyright © 2026 All Rights Reserved.
